Hardware database · 046D:C283

Logitech WingMan Force 3D

046D:C283 · 3 approved reports · first 2026-05-10, last 2026-09-23 · probe 1.0.8

Capability snapshots · latest per OS

What this device reports on each platform

Windows

3 reports · latest 2026-09-23 · probe 1.0.8

Microsoft Windows NT 10

Axes4

Buttons7

POVs1

FF sample period 1000 µs

Min time resolution 1000 µs

Firmware rev0x0001

Hardware rev0x0001

FF driver ver0x0509

Capability flags: DIDC_ATTACHED | DIDC_EMULATED | DIDC_POLLEDDATAFORMAT | DIDC_FORCEFEEDBACK | DIDC_FFATTACK | DIDC_FFFADE | DIDC_SATURATION | DIDC_POSNEGCOEFFICIENTS | DIDC_DEADBAND

Supported effects 12

Constant Force

DIEFT_CONSTANTFORCE | FFATTACK | FFFADE | STARTDELAY

Ramp Force

DIEFT_RAMPFORCE | FFATTACK | FFFADE | STARTDELAY

Square

DIEFT_PERIODIC | FFATTACK | FFFADE | STARTDELAY

Sine

DIEFT_PERIODIC | FFATTACK | FFFADE | STARTDELAY

Triangle

DIEFT_PERIODIC | FFATTACK | FFFADE | STARTDELAY

Sawtooth Up

DIEFT_PERIODIC | FFATTACK | FFFADE | STARTDELAY

Sawtooth Down

DIEFT_PERIODIC | FFATTACK | FFFADE | STARTDELAY

Spring

DIEFT_CONDITION | SATURATION | POSNEGCOEFFICIENTS | DEADBAND | STARTDELAY

Damper

DIEFT_CONDITION | SATURATION | POSNEGCOEFFICIENTS | DEADBAND | STARTDELAY

Inertia

DIEFT_CONDITION | SATURATION | POSNEGCOEFFICIENTS | DEADBAND | STARTDELAY

Friction

DIEFT_CONDITION | SATURATION | POSNEGCOEFFICIENTS | DEADBAND | STARTDELAY

Custom Force

DIEFT_CUSTOMFORCE | FFATTACK | FFFADE | STARTDELAY

Reported by OS

Submission count by OS family

Windows 3 reports

What testers felt · all approved reports

Chip selections by effect

Damper 3 reports

Damped x1 Resists motion x1 Weak damping x1

Friction 3 reports

Weak friction x2 Sticky x1

Inertia 3 reports

Did nothing x2 Strong inertia x1

Saturation — 1 co-directional constants 3 reports

Brief jerk x1

Saturation — 2 co-directional constants 3 reports

Pulled back x1 Strong pull x1

Saturation — 3 co-directional constants 3 reports

Pulled diagonally x1

Sawtooth Down 3 reports

Asymmetric ramp pulses x1 Repeated ramping x1 Slow x1

Sawtooth Up 3 reports

Asymmetric ramp pulses x1 Buzzing x1 Repeated ramping x1

Sine 3 reports

Smooth oscillation x3

Spring 3 reports

Centered x1 Returns to center x1 Soft spring x1

Square 3 reports

Sharp pulses x2 Did nothing x1

Triangle 3 reports

Smooth oscillation x2 Rocking back and forth x1

Two-axis diagonal — diagonal 3 reports

Pulled diagonally x1 Soft pull x1 Strong pull x1

Polarity sweep — DI east (0°) 2 reports

Pulled back x1 Pulled left x1

Polarity sweep — DI north (270°) 2 reports

Pulled diagonally x1 Pulled right x1

Polarity sweep — DI south (90°) 2 reports

Pulled left x1 Pulled right x1

Polarity sweep — DI west (180°) 2 reports

Pulled forward x2

Polarity sweep — DI east (right) (90°) 1 report

Pulled right x1

Polarity sweep — DI north (away) (0°) 1 report

Pulled left x1

Polarity sweep — DI south (toward) (180°) 1 report

Pulled forward x1

Polarity sweep — DI west (left) (270°) 1 report

Pulled back x1

Direction consistency · constant-force direction tests

What the commanded directions actually did

Direction reports are inconsistent

Scored responses11

Matched6

Mismatched5

Consistency55%

No direction1

Several directions0

Unparseable0

Scoring covers the Windows polarity sweep and the Linux constant-force tests. A commanded direction is the direction the force comes from, so 0° should move the stick toward the tester. Scoring uses the documented mapping: 0° → Pulled back, 90° → Pulled left, 180° → Pulled forward, 270° → Pulled right. Answers that name more than one direction are counted separately and never scored.

Commanded	Expected	Observed	Matched	Mismatched
0° north (away)	Pulled back	Pulled left x2 Pulled back x1	1	2
90° east (right)	Pulled left	Pulled right x2 Pulled left x1	1	2
180° south (toward)	Pulled forward	Pulled forward x3	3	0
270° west (left)	Pulled right	Pulled right x1 Pulled back x1	1	1

Technical results · all approved reports

Create / Play / Stop outcomes by effect

Effect	Reports	Create	Play	Stop
Damper	3	OK x3	OK x3	OK x3
Friction	3	OK x3	OK x3	OK x3
Inertia	3	OK x3	OK x3	OK x3
Sawtooth Down	3	OK x3	OK x3	OK x3
Sawtooth Up	3	OK x3	OK x3	OK x3
Sine	3	OK x3	OK x3	OK x3
Spring	3	OK x3	OK x3	OK x3
Square	3	OK x3	OK x3	OK x3
Triangle	3	OK x3	OK x3	OK x3

Diagnostic visibility · current policy

Technical diagnostics are aggregated on this page so driver authors and tool builders can compare what multiple testers saw, including Windows and Linux runs for the same VID:PID. They use closed result names and path-redacted errors; the private response-notes field includes typed text and the probe-measured motion.

What's NOT on this page

The one private field

The per-effect responses[].notes field stays off this page. It can contain optional typed text and the probe-measured motion. Capability flags, supported effects, OS breakdown, test strength, chip labels, result codes, failed effects, and run errors can be published in aggregate or as a latest-per-platform snapshot. Read the full privacy contract →

Measured motion is what the probe saw on the stick's X and Y axes while each effect played: the signed peak movement as a percentage of the axis's half range, for example X peak +25.1%. It is measured from where the stick rested when the effect started, so it can exceed 100% when the stick rests off-centre. Condition effects such as spring and damper are not expected to move a centred stick.

Got this stick?

Run FFB Probe and share your result to improve this page.